Sheepwalk Electronics

Home Online Store Information / Shipping 1-Wire Host Adapters Sensor Modules 1-Wire ICs Misc Components Cables and Connectors Product/Module Information SWE0 Sensor SWE1 Module SWE2 Module SWE2a Module SWE3 Module SWE4 Module SWE5 Module SWE6 Module RPI1 Host Adapter RPI2v1 Host Adapter RPI2v2 Host Adapter RPI3 Host Adapter 1-Wire Information 1-Wire Network Basics Wiring Information Raspberry Pi

RPI2 Jumper Setting Details. As of the v1.1 PCB revision we are now shipping the RPI2 with jumpers in J1 and J2 instead of hard wiring the i2c address. All kits will also now come with jumpers for you to solder in. This allows you to set the i2c address of your RPI2. For most people it won't matter what it is set to but if you have multiple RPI2s or you also have other i2c devices on the bus you might need to change the address. The following table shows the valid jumper positions and the corresponding i2c addresses: 0x18 0x19 0x1a 0x1b

Sheepwalk Electronics is a trading name of Sheepwalk Cottage Limited, registered in England number 06303042.