RPI1 Parts List / Assembly

To build an RPI1 you will require the following parts which are all included if you purchase a kit of parts from us:
2x5 way 0.1" pitch header
RJ45 PCB mount socket
3 way 0.15" pitch screw terminal block
4.7kΩ resistor
DS18B20 temperature sensor

The DS18B20 sensor is optional, if you do not want to know the temperature where your Pi is you can omit it.

The RJ45 socket and screw terminals are also optional, you can omit one or both of them if you do not wish to use them.

Assembly should be straightforward for anyone with basic soldering skills. The DS18B20 should be inserted as shown by the silk screen printed on the PCB.

Back to RPI1 Shop Page
Quick Find
Use keywords to find the product you are looking for.
Advanced Search
0 items